ICOM IC-A110 ( AirBand)

Specifications General Frequency range 118.000 - 136.975 MHz Channel spacing ( according to version) 8.33/ 25 kHz auto selection or 25 kHz only Mode 6K00A3E ( AM) No. of memory Ch. 20 Antenna connector SO-239 ( 50© ) Power supply requirement ( negative ground) 13.75 V DC or 27.5 V DC automatic selection Current drain ( at 13.75 V DC) Transmitting Receiving 5.0A max. 4.0A ( at AF max.) 0.5A ( at stand-by) Operating temperature range -30° C to + 60° C; -22° F to + 140° F Frequency stability ± 5 ppm ( -30° C to + 60° C) Dimensions ( projections not incl.) 150( W) × 50( H) × 180( D) mm 529/ 32( W) × 131/ 32( H) × 73/ 32( D) in Weight ( approx.) 1.5 kg; 3 lb 5 oz Transmitter Output power 36 W typ. pep ( 9 W typ. for CW) Modulation limiting 70 - 100% ( IC-A110) Modulation compression Linear 85% Max. 95% AF harmonic distortion Less than 10% ( at max. mod.) Hum and Noise ratio More than 40 dB Spurious emissions Less than -16 dBm Adjacent Ch. power* Less than 60 dB ( 25 kHz) Less than 50 dB ( 8.33 kHz) Microphone connector 8-pin modulator ( 600© ) Receiver Receiving system Double conversion superheterodyne Intermediate freq. 1st 38.85 MHz 2nd 450 kHz Sensitivity ( pd) Less than 1 µ V ( at 6 dB S/ N) Squelch sensitivity ( pd; at threshold) Less than 0.3 µ V Selectivity 25 kHz Ch. Spacing 8.33 kHz Ch. Spacing More than ± 8 kHz ( at -6 dB) Less than ± 17 kHz ( at -40 dB) Less than ± 25 kHz ( at -60 dB) More than ± 2.778 kHz ( at -6 dB) Less than ± 7.37 kHz ( at -60 dB) Spurious response More than 74 dBµ Intermodulation rejection ratio* More than 64 dB BIocking/ desensitisation* More than 70 dB Cross modulation rejection* More than 70 dB Audio output power Internal speaker External Speaker Headeset ( side tone) ( at 13.75 V; 10% dist.; 60% mod.) 1.5 W typical w/ 8© load More than 10.0 W w/ 8© load More than 0.1 W w/ 500© load AF output impedance EXT SP Headset ( side tone) 8© 500© * These specification items are not available for the IC-A110 due to approval test speciflcations. Applicable U.S. Military Specifications Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows: Standard MIL 810C MIL 810D MIL 810E Method Procedure Method Procedure Method Procedure Low Pressure 500.1 I 500.2 I, II 500.3 I, II High Temp. 501.1 I 501.2 I, II 501.3 I, II Low Temp. 502.1 I 502.2 I, II 502.3 I, II Temp. Shock 503.1 I 503.2 I 503.3 I Solar Radiation 505.1 I 505.2 I 505.3 I Rain 506.1 I, II 506.2 I, II 506.3 I, II Humidity 507.1 I, II 507.2 II, III 507.3 II, III Salt Fog 509.1 I 509.2 I 509.3 I Dust 510.1 I 510.2 I 510.3 I Vibration 514.2 VIII, X 514.3 I 514.4 I Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV Measurements made in accordance with RTCA D0-186a ( Class C/ E, Class 4/ 6) or EN 300 676. All stated specifications are and subject to change without notice or obligation. Type approval for the IC-A110 varies between countries. Ask your dealer for details. Supplied Accessories * Hand microphone, HM-161 * DC power cable * Mounting bracket kit * Microphone hanger kit * Fuses